SHOP aerolight smartlight Smart Home Downloads News OEM

Everything switchable. Everything is under control.


SWD-ED
1-channel servo decoder, servo pluggable





The mXion SWD-ED is a powerful single servo decoder for attaching a servo (included). Furthermore, it has a function output with various possibilities (eg flashing when switching the servo). The 5V regulator is already built in, so you can use the servo decoder directly and no further components needed. Switchable via function keys (F-key, locomotive address) as well as turnout address (arrow keys). The end positions and the speed are freely adjustable. The SWD-ED can do many useful functions, such as:

Bells swing (freely adjustable swinging up and down with realistic speed increase or decrease)
Control via the rotary control (eg for cranes)
Teetering as with wing signals (freely adjustable 2-phase rocking)
Control over end positions optionally with end position adjustment

Of course the GLD is 100% NMRA-DCC compatible. For details, see the Operation Manual.

PWD
2 channel function decoder with bufferr





Der mXion PWD is a very compact 2-channel function decoder with integrated high performance buffer. It can be exchanged directly 1: 1 for the existing electronics in the illuminated LGB passenger cars (Rhb, DB-IC, DB D-train etc.). Then a flicker-free operation for several minutes is possible. It also has, like the original electronics, a switch and full analog and digital functionality. It can perform a wide range of special and imitation simulations on both function outputs (eg TV, on or off delay, neon, gas lamps, fire, dimming, etc ...). Random controls for a toilet is also possible. Directional tax (for tax cars) is also supported. Of course, the PWD can also be used perfectly in other passenger cars or for DIY. The PWD is of course 100% NMRA-DCC compatible. For details, see theBedienungsanleitung.

GLD
2 channel function decoder





The mXion GLD is a very small 2-channel function decoder. This is the ideal complement to the G-Lights and can be hidden directly in the BOX. It can perform a wide range of special and imitation simulations on both function outputs (eg TV, on or off delay, neon, gas lamps, fire, dimming, etc ...). Since it is very small, it is ideal for retrofitting it in wagons, locomotives or buildings. The GLD can work digital as well as analogue and can even be switched optionally via a turnout address (up to 255) or via normal function keys with a locomotive address. Of course the GLD is 100% NMRA-DCC compatible. For details, see the Operation Manual.

FSD
9 channel function decoder + servo





The mXion FSD is a very small 9-channel function decoder. He is the big brother of the little GLD. It can perform a wide range of special and imitation simulations on all function outputs (eg TV, on or off delay, neon, Gas lamps, fire, dimming, etc ...). Servo functionality is also implemented. Since it is very small, it is ideal for retrofitting it in wagons, locomotives or buildings. In addition, he can through the integrated light sensor div. Take control tasks, in which one can install the light sensor. Furthermore supported the FSD div. Light patterns and effects (traffic lights, funfair, running light, etc ...) which are freely configurable. There is also a "Swiss Mapping": In addition to the "Swiss Mapping" and the American special functions, the FSD has a total of 19 special functions as well as special light functions. The FSD has a function mapping up to F68. Of course, the FSD is 100% NMRA-DCC compatible. For details, see the Operation Manual

USD
6 channel switching decoder with effects, SDF




Der mXion USD is a very small 6-channel switching decoder (switchable via turnout addresses). It can on each output up to 18 effects (eg TV, on or off delay, neon, gas lamps, fire, dimming, various flashing, etc.). In addition, the decoder can use the SDF system known from the FSD. It is thus possible, the 6 channels for div. Light pattern, running lights, fairground, construction site, busy house and much more. to use. This allows the decoder a wide range of application examples such as street lighting, fairgrounds, houses and more. The use of turnout addresses makes it ideal for stationary use. In addition to programming via CVs, the addresses can also be set via the programming button. The USD can be DCC and Märklin Motorola Protkoll and is of course 100% NMRA-DCC and Märklin-Motorola compatible. See more in the Operation Manual.